6000pcs/h Egg Tray Production Line

AGICO offers various models of egg tray production line with different outputs. This 6000 pieces per hour egg tray production line is mainly suitable for the large scale production.

From raw materials to the final pulp molding products, 6000pcs/h egg tray production line can offer all the equipment for customers, like pulping machine, egg tray molding machine, drying machine and packaging machine. AGICO offers the service of installation and debugging.

procedures of egg tray making

Why 6000pcs Automatic Egg Tray Production Line?

  • The engineer is responsible for the installation and commissioning of the on-site egg tray equipment. After the equipment is successfully debugged, the supplier shall provide the user with the test results in writing, and the supplier’s technical personnel may not leave the site until the user’s consent is obtained.
  • Our company implements lifelong tracking service. The equipment warranty period under the contract is free warranty within one year after successful installation and commissioning (except for vulnerable parts and abnormal failures). After one year, only parts cost and service cost will be charged.
  • Our company regards the inspection system as one of the routine maintenance tasks, that is, the company regularly inspects the equipment in operation. The company’s inspections are dominated by engineering and technical personnel, with designers participating. And listen to the problems and suggestions of user maintenance personnel, and constantly improve the function and quality of the product.
  • The product has large output, low consumption and high automation, which is suitable for enterprises with high input and high output. Labor costs are very low. Only 3-5 workers can operate the 6000pcs egg tray production line.

Specification of 6000pcs Automatic Egg Tray Production Line

Production line modelsOutput(p/h)Pulping machineEgg tray machineDrying type
ZMDT5×12-6000T6000ZDS6(6m³)DT5×12(60 moulds)Civil engineering
ZMDT5×12-6000J1Single layer metal
ZMDT5×12-6000J6Multilayer metal

Consumption Table of 6000pcs/h Egg Tray Production Line

ModelsDrying typeMaterial(kg/h)Power(kw/h)Fuel(kg/h)
PaperWaterCoalGas(m³/h)DieselLPG
ZMDT5×12-6000TCivil engineering510153010520892-10377-8777-87
ZMDT5×12-6000J1Single layer metal105 92-10377-8777-87
ZMDT5×12-6000J6Multilayer metal105 92-10377-8777-87

Notes: 1. The above data is calculated according to the weight of each egg tray of 100g. 2. The above data is calculated as pure pulp without adding stone powder. If 20-30% stone powder is added, the actual consumption of paper is 70-80% of the above data. 

ZMDT5×12 6000pcs/h Egg Tray Machine

For 6000pcs/h egg tray production line, the most suitable egg tray machine is ZMDT5×12 6000, the output is 6000pcs/h. The automation of this 6000pcs per hour egg tray production line is so high that only 3-5  workers can finish the whole procedures. This is the biggest difference from other egg tray peoduction line. 

molding product

Drying Methods of 6000pcs/h Egg Tray Production Line

Because of the high output and automation of the production line, all the three drying methods are suitable. Namely, civil engineering drying, single layer metal drying and multilayer metal. Here we recommend the multilayer metal drying method, this is because the output is large, it needs high automatic machine. What’s more, the multilayer metal drying occupies a small area. And the cost of multilayer metal drying is almost the same to the single layer metal, but the output is higher than it. So multilayer metal drying is the most proper drying method for the 6000pcs/h egg tray production line.