1000pcs/h Egg Tray Production Line

Models of 1000pcs/h egg tray production line

Necessary procedures of egg tray production line are needed no matter what capacity of the line is. This applies to 1000pcs/h egg tray production line. Pulping, molding, drying and packing are the whole procedures

Pulping equipment

Molding equipment

Drying system

Packing equipment

Models of 1000pcs/h egg tray production line

Production line modelsOutput(p/h)Pulping machineEgg tray machineDrying type
ZMDT3×1-10001000ZDS1(1m³)DTF3×1(3 moulds)Natural drying
ZMDT3×1-1000TCivil engineering
ZMDT3×1-1000J1Single layer metal
ZMDT3×1-1000J6Multilayer metal

Consumption table of 1000pcs/h egg tray production line

ModelsDrying typeMaterial(kg/h)Power(kw/h)Fuel(kg/h)
PaperWaterCoalGas(m³/h)DieselLPG
ZMDT3×1-1000Natural drying8525523.1    
ZMDT3×1-1000TCivil engineering36.15022-3218-2818-28
ZMDT3×1-1000J1Single layer metal36.1 22-3218-2818-28
ZMDT3×1-1000J6Multilayer metal36.1 22-3218-2818-28

Notes: 1. The above data is calculated according to the weight of each egg tray of 100g. 2. The above data is calculated as pure pulp without adding stone powder. If 20-30% stone powder is added, the actual consumption of paper is 70-80% of the above data. Contact us for more details.

We have many successful cases about our 1000pcs/h egg tray equipment. If you want to know more, please look here.

1000pcs/h egg tray equipment with ZMDT1X3 in Ethiopia

1000pcs/h Egg Tray Production Equipment was Installed in Ethiopia

Whole set of 1000pcs/h egg tray production line

Pulp molded paper products are typical green products, environmental protection and reusable, is the ideal alternative to traditional foamed polystyrene, can effectively ease the white pollution problem, so pulp molded products are very popular。

This equipment is a flip type molding machine, the components of the equipment consists of pulp crusher, pulp making system, molding machine in one, the equipment design is reasonable, compact, covers an area of very small. Among them, the egg tray making machine is composed of forming template, transfer template, gear reducer, motor, intelligent control electric appliance, cylinder, solenoid valve and other components. The capacity of the equipment is 1000 pieces/hour, and the operation mode of the forming machine adopts reverse suction forming. The raw materials are waste book paper, waste newspaper, waste carton, waste paper and paper tail pulp, etc. It is more suitable for natural drying method. Once the whole set of equipment is unloaded, the customer can connect it according to our drawings and put it into use immediately after debugging, which greatly shortens the construction period of the production line and is appreciated by a large number of customers.

whole set of egg tray making machine
whole set of egg tray equipment