First of all, the main body of the egg tray machine must be stable and firm.
The best way is to use laser cutting to minimize the error of spare parts. Due to the small error of the egg tray and spare parts produced in this way, the structural stability of the egg tray machine after assembly is very good.
Secondly, the material of the egg tray machine body is very important.
The egg tray machine cannot avoid contact with water during production. Over time, many egg tray machines with poor materials will rust on the surface, and even seriously affect the production of egg trays.
In order to avoid this situation, the whole body of the egg tray machine with excellent quality will be made of stainless steel plate, which reduces the probability of the equipment being corroded. Even if it is used for a long time, the surface of the body will be intact.
The third point is that the machine sealing structure must be firm and complete, and there should be no cracks.
Once many egg tray machines are put into production, they will operate continuously for 24 hours for a long time. At the same time, the egg tray machine will also be in contact with the water source for a long time. At this time, it is necessary to test whether the sealing structure of the body is tight and complete. Inferior egg tray machines are generally not completely sealed, and there will be slight cracks. Water is likely to leak into the body seal through the cracks, resulting in failure of the egg tray machine.
Fourth is that the operation interface of the egg tray machine is clear and clear.
In recent years, the egg tray machine has entered the era of full automation. There is no need for excessive human intervention. The operator only needs to operate the egg tray machine. An overly complex operation interface will increase the operator’s learning cost, and the redundant functions are not conducive to use.
Last but the most important is good after-sales service.
During the production of egg tray machine, it is inevitable to encounter many problems and accidents. Many egg tray machine manufacturers have no after-sales service at all, which is a one-time transaction. The customer’s egg tray machine problems are completely ignored. This time highlights the advantages of good after-sales service, a good after-sales service can greatly improve customer experience, but also save a lot of trouble.